100% Brand New, never been used
Professional Installation is Highly Recommended (No Instruction Included).
1X Go Kart Drive Belt
Just as pictures show
Comet 203591A -Q43203
Used on all yerf-dog kart torque-converter karts with Tecumseh engines.
How to Select the Correct Comet Belt?
1.Determine the Series Type
2.Measure the “Outer Diameter” (O.D.) of the driven pulley on the jackshaft.
3.Measure the “Center Distance” (C.D.); which is the exact distance between the center of the engine crankshaft and the center of the jackshaft. Must be precise.
4.Use the two measurements; the driven pulley outer diameter and center distance measurement to determine the correct belt part number from the relevant chart below.
Should your machine’s center distance fall between the center distance (C.D.) settings listed here, select from the two belts the one with the larger outside circumference (O.C.) for best wear and to avoid machine “creep” during idling.
🏎Comet Belt 203591A fits Comet 30 Series Torque Converters for 3 to 8hp engines.
🏎Belt fit for Yerf-dog #203591/Q430203W
🏎The asymmetrical cog belt used on all Yerf-dog go-karts with Tecumseh engines and belt.
🏎Width: 0.75 inch;Length: 29.25 inch; Driven torque-converters; The package contains a belt, belt with waist seal randomly delivered.
🏎Pulley needs to be from 7 9/16 inch to 7 5/8 inch(6″ Driven), or from 6 13/16 to 6 7/8 inch(7″ Driven) (measured from the center of the clutch to the center of the driven pulley)