The pushrod is one of the most important pieces of the valve train, but all too often it’s taken for granted. Pushrods not only have to be strong enough to not fail, bend or burn up at the ends, they must also match the frequency of all the rest of the parts in the valve train, as well as the rpm at which the engine will be run. Today’s all-out race engines demand the highest quality components at every step, and COMP Cams Hi-TechPushrods fill that requirement. Hi-TechPushrods feature a one-piece design from .080” wall, seamless chromemoly tubing that ensures the ultimate in strength and durability. Ends are precision formed, yielding added thickness and strength in the critical tip area, while maintaining constant wall thickness and concentricity. The pushrods are then heat-treated for maximum strength to ensure compatibility with guide plates. They are OD ground for consistency and black-oxide finished with length and part number laser etched on the OD for ease of identification.
Quality Construction – COMP Cams Hi-Tech Series Pushrods are constructed from a single piece of chromemoly steel with a wall thickness 0.080″, ensuring these pushrods withstand high loads for the life of the engine and do not flex.
Guide Plate Compatible – Hi-Tech Pushrods are all heat-treated before they leave our facility, guaranteeing that using them with guideplates will not ruin them prematurely.
High Quality, Long Lasting Finish – Hi-Tech Series Pushrods are all finished with a black oxide coating, ensuring the the chromemoly steel will not rust or wear prematurely. Additionally, we laser etch our pushrods with the part number, making it easy to order replacements.
Race Ready – Quality and precision manufactured from start to finish, these pushrods are at home in both daily driven street vehicles, as well as racing applications. The Magnum Series is a great upgrade from our High Energy line, especially if aggressive camshafts and higher load springs are part of your build.
Application Specific Sets – While we sell our Hi-Tech Series Pushrods from 6.200″ to 9.800″ long in sets of 16 and individually, we also offer sets custom tailored for your application. COMP Cams has custom Magnum Pushrod Sets for Chevrolet, Chrysler, Ford, Oldsmobile and Pontiac – making ordering our high end pushrods easier than ever!
5/16″ and 3/8″ – In addition to offering application specific sets, we offer both 5/16″ and 3/8″ diameter designs: 6.200″ to 9.500″ in 5/16″ and 7.500″ to 11.100″ in 3/8″.